Industrial Boiler Membrane , Membrane Wall Energy Saving For Power Station

SA210A1 carbon steel boiler parts membrane water panel for industrial fire tube boiler boiler water walls
 
SA210A1 carbon steel boiler parts membrane water panel Brief Introduction
 
1. Water walls are the main heating part of boilers, they are composed of rows of steel tubes, arranged on surrrandings of boiler furnace.
2. Inside it are flowing water or steam, the outside receive firing heat of the boiler furnace.
3. They mainly absorb radiation heat by high temperature combusion products in the furnace, and the working fluid are going up, to be heated and vaporized.
4. Boiler water walls are membrane walls that are made of tubes welded together with or without a strip of metal in between.
5. These walls form the enclosure of the coal combustion chamber. Water wall tubes are also referred to as the evaporator section; they contain water mostly in liquid form which gradually evaporates as it rises in the boiler.
6. Our membrane water wall are manufactured using high grade raw material and contemporary production equipment at our advanced manufacturing unit. The offered range is available in various sizes, shapes and specifications, as per the requirements of our esteemed clients. 7. Further, these are delivered to the clients within promised time frame.
 
Advantages of Membrane Water Wall
 
1. To guarantee the leakproofness of furnace wall and reduce the air leak of combustion chamber.
2. To achieve the full water cooling of combustion chamber, and the boiler accessories membrane water wall is benefit to prevent coking under the condition of supplemental firing.
3. The thermal storage capacity is small, the warming of combustion chamber is fast and the cooling is also fast, which could shorten the cooling time of boiler’s start and furnace shut down.
4. It is good to adopt top supported water cooled wall and it could reduce the load of boiler framework, which is benefit to overhang.
5. Compared with the bare tubes, the membrane water wall improves the heat absorption capacity of tubes.
6. The factory direct boiler membrane water wall could improve the Preliminary combination degree of boiler parts and reduce the installation workload.
 

Workshop Display