Longitudinal Fin Tube Boiler Membrane , Boiler Water Wall Tubes Erosion Protective

Membrane Longitudinal fin tube boiler hot water wall cooling panel steel fin tube use of furnace
 

Membrane Longitudinal fin tube boiler hot water wall Inspection Details

1. Strength calculation report with applied materials information;
2. 100%NDT(non-destructive inspection) report of steel plate, tube and welding rod;
3. 100%X-ray inspection report (welding seam): to ensure the quality of the entire boiler;
4. Hydraulic test report: ensure the standard working pressure and safety.

Carbon Steel Membrane Water Wall Panels Functions

1. Protect the furnace wall and reduce the erosion and damage of high temperature smoke and slag in the furnace to the furnace wall.
2. After installing water wall, the temperature of inner wall and flue gas temperature in furnace are greatly reduced, which can effectively prevent slag forming on furnace wall and heating surface, and reduce thickness and weight of furnace wall.
3. Modern large boiler, the use of furnace wall and water-cooled wall tube together to form a pipe-type or tube on the furnace wall, that is, the use of water-cooled wall tube suspended furnace wall.
4. The high temperature flame in the furnace conducts heat to the water-wall tube, mainly by radiation.
The radiative heat transfer intensity is proportional to the fourth power of the absolute gas temperature.
5. Because the gas temperature in the furnace is very high, so, the water wall tube in the furnace to absorb radiation heat transfer is very strong, is the main boiler evaporation heating surface.
6. For high pressure and ultra-high pressure boilers, radiant superheater is usually arranged on the top of the furnace;
7. For the dc boiler, part of the preheating heating surface (equivalent to economizer) and overheating heating surface (equivalent to superheater) are often arranged in the water wall;
8. While the supercritical dc boiler, because there is no evaporation heating surface, the water wall is only used to heat water and superheated steam.

Membrane Water Wall Panel Product 

1. Water wall panels with pins usually laid vertically on the inner wall of the furnace wall, it is mainly used to absorb the radiant heat emitted by the flame and high-temperature flue gas in the furnace.

2. It is the main type of evaporating heating surface of all kinds of modern boilers and the basic component of boiler water circulation loop.

3. Because of both cooling and protection of the furnace wall, so the name.

4. The water wall was originally designed not to be heated, but to cool the furnace from high temperature damage.

5. Later, because of its good heat exchange function, it gradually replaced the steam drum as the main heating part of the boiler.

Product Display